The Audit 106 is the ultrasonic thickness gauge measure instrument for measurement of engineering materials.
The Audit 106 offers the additional facility of ten preset calibration programs for a selection of commonly used engineering materials.
Display : 4 digit LCD Range : 1,5 to 99,9 mm ( steel ) Resolution : 0,1 mm Accuracy : +/-0,1mm, +/-1 digit or +/-1 % Zero facility : button on the front panel Calibration : for 10 different materials Power : 2 x AA alkaline cells, tinternally mounted Battery Life : approx. 100 hours continuous use Low Battery Warning : displaed when approx. 10 hours continuous use remain available Auto Power Off : in 60 seconds after last use Display Retention : 5 seconds from probe lift off Environmental Protection : Sealed to IP65 Temperature Range Operation : -5 ... +55°C Temperature Range Storage : -20 ... + 70°C Dimensions : 151 x 82 x 33 mm Weight : 290 g |
Selection of commonly used engineering materials The Audit 106 offers of 10 preset calibration programs. This is the most used materials in industry:
- 0 Steel
- 1 Stainless Steel
- 2 Aluminium
- 3 Copper
- 4 70/30 Brass
- 5 SG Iron
- 6 Flake Iron
- 7 Perspex/Nylon
- 8 PVC
- 9 Polypropyleen
Applications The Audit 106 is essential for the Plant Maintenance Engineer or Engineering Surveyor. From pipelines to pressure vessels, tubes to tankers, castings to casings, boilers to bunkers, stairways to stanchions, cranes to conveyors, and gas tanks to gantries, Audit ultrasonic thickness gauges are the cost effective way to:
- comply with statutory requirements
- measure abrasion wear rates
- plan intervals between inspections
- predict useful plant life
- avoid costly unscheduled maintenance
- assess working plant without shutdown
User industries Audit ultrasonic thickness gauges have found ready applications in a wide variety of industries, including : Road Transport, Chemicals & Petrochemicals, Warehousing, Food Manufacture, Railways, Shipping, Offshore, Civil Engineering, Process Industries, Defence, Aircraft, Glass, General Engineering, LPG and mains gas distribution, Mechanical Handling, Plastics, Mines é Quarries, Engineering Insurance, Water Distribution, Fabrication, Paper, cement, Forges & Foundries, Tubemaking.
Standard Equipment
- Instrument
- DT25, 5 MHz, probe fitted with integral probe lead
- 2AA alkaline cells
- Operator Manual
- Mouldede plastic transit case
Optional Equipment
- DT15, 5MHz, probe, fitted with subvis connectors
- Twin probe cable for use with DT 15 probe
- Probe holder to allow use of DT15 probe on curved surfaces down to a radius of 10 mm
- Carrying pouch, attachable to belt
- Extra long life Lithium batteries
Bercu nv
Noordschippersdok 13 T. +32 3 225 32 73
B-2060 Antwerp F. +32 3 234 18 49
Belgium ejb@bercu.be
www.bercu.be www.bercu.com Copyright 2022@ Bercu nv. All rights reserved.