DIGITRON DGS-10 GAS LEAK DETECTOR
The Digitron DGS-10 Gas
Leak Detector, specially designed for HVAC applications
is a "must" in any heating engineer's tool kit. It
pinpoints flammable gas leaks in residential and
commercial applications and also verifies that the work
undertaken is leak free.
The DGS-10 is an advanced
state-of art gas leak detector capable of detecting many
flammable gases. Hight sensitivity provides accurate
detection.
Detection : 16 gases Indication : LED-Light (illuminates the tip sensing area) Sensor : solide state Probe length : 406mm Rubber boot instrument protection Sensitivity : 10 ppm Methane (CH4) Response time : instaneous Duty cycle : continuous Power supply : 9V alcaline battery Battery life : approx. 1000 x 20 second readings Size : 77 x 170 x 40 mm Weight : 450 g |
General info It is simple to operate. Start by setting the Red LED and the audible 'tick-rate' to a background gas level. As the gas concentration from a leak increases so does the frequency of the flashes and 'tic-rate'.
To identify a gas leak adjust the 'tick-rate' back to the background level, then move the instrument to suspected areas of higher gas concentration until the leak is detected.
The DGS-10 has a long, flexible gooseneck and small sensor head to allow its use in tight, difficult to reach areas. Viewing the area around the leak is made easy with a unique 'tip-light' incorporated into the sensor head.
After using DGS-10 simply wrap its gooseneck probe around the rubber sleeve for easy storage and protection.
Detected gases :
- Acetone - Alcohol - Ammonia - Butane - Gasoline - Jet Fuel - Hydrogen Sulphide - Industrial Solvents - Methane - Lacquer Thinner - Naphtha
- Natural Gas - Propane
Bercu nv
Noordschippersdok 13 T. +32 3 225 32 73
B-2060 Antwerp F. +32 3 234 18 49
Belgium ejb@bercu.be
www.bercu.be www.bercu.com Copyright 2022@ Bercu nv. All rights reserved.