GANN HYDROMETTE COMPACT
Electronic Moisture Meter for wood and plaster.
The Hydromette Compact allows moisture checks on timber, veneer, wooden frames, windows and doors.
The hand closes naturelly around the ergonomic form of the housing so that the pins on the end of the instrument can be pressed into the material to be measured. The thin points make it easy to measure the moisture content of sawn timber, chipboard, veneer and fiberboard materials up to a maximum of 25 mm thickness as well as normal gypsum or mixed plaster.
Completely automatic instrument setting
No separate electrodes or leads required
Two-group wood species correction
Measurement of plaster moisture content with a direct readout in percent of dry weight
Measuring range : 5 to 20% m.c.
Measuring range : 0,3 to 3,5% plaster m.c.
Temperature of measure : between 15°C-25°C
Range :0,1% weight procent
Display : large 3-digit LCD display
Automatc correction : for 2 groeps species
Elektrodes : 2 steel points
Power supply : from 9V dry cell or rechargeable NiCd battery
Dimensions : lenght 200 x width 36 x thickness 35mm
Weight : 120 g.
Table of Wood Species
General Remarks The Hydromette Compact is equipped with a selector for setting two different calibrations for wood. Wood species group 2 and 3 of the standard table of wood species apply. The reading refers to a wood temperature of 20°C.
With the selector switch set to position B, also moisture checks on plaster are possible. The reading are displayed direct in percent of dry weight.
Calibration The meter is fitted with an electronic setting device making manual calibration or adjustment unnecessary.
Noordschippersdok 13 T. +32 3 225 32 73 firstname.lastname@example.org
B-2060 Antwerp F. +32 3 234 18 49
www.bercu.be www.bercu.com Copyright @ Bercu nv. All rights reserved.